THP 94/42 R 4 XXTTHP 125/42 R 4 XXTTHP 140 H/42 R 4 XXTGB-07.2005SAFETY INSTRUCTIONS AND INFORMATIONC HAPTER 22-6 Work on or with the machine may be performed only by suitably instructed reliable personnel and/or technicalstaff. Before starting work it should be determined which personnel shall perform the necessary operating andmaintenance work. When operating the machine the legislation and regulations applicable at the place of use should be observed.In the interests of safe working procedures, the user, supervision and equipment operator are responsible forcomplying with regulations. Before starting work, all necessary functional checks should be performed on the machine. Items not required in the immediate working process (tools, lubricants, cleaning materials, etc.) must be stowedonly in their proper places, since otherwise they may obstruct safe operation. During cleaning work, especially with solvents or petrol washes, safety gloves and safety glasses must beworn. No naked lights or smoking when cleaning is being performed! Disposal of consumable materials to TAwaste code 524.02 should be to EC directive 91/689/EWG. Consumables such as lubricants, cleaning materials during maintenance, repair and oil change should becollected in suitable containers and disposed of in accordance with regulations (to EC directive 75/439/EWGand statutory instruments under §§ 5a, 5b AbfG and AltölV).2.6 Information on risks of injuryImproper use of the truck-mounted concrete pump may lead to the following injuries: Injuries to the eyes due to splashes of concrete, concrete mixing water or other chemical substances. Injuries to the eyes and other injuries due to hydraulic oil spurting out if the system is not depressurised. Injuries due to centrifugal forces of bursting couplings, bursting pipework or plugs blown out of the concreteconveying pipework. Hazards of touching electrical cables. Electric shock (which can be fatal) from machines with electrical drives, if electrical connections are not properlymade or the connecting cables are defective. Danger of tipping over due to collapse of the outriggers. Injuries due to burns if hot parts are touched. Injuries due to falling pipes. Injuries to personnel due to inadvertent operation of the machine controls and hence inadvertent operation ofthe machine.
