STARTING UP AND OPERATINGC HAPTER 7THP 94/42 R 4 XXTTHP 125/42 R 4 XXTTHP 140 H/42 R 4 XXTGB-07.20057-147.4.2 Controlling the distributor boom usingthe radio remote control pendant• Set the operating mode selection switch (Item 14, Fig.7.6) to “Remote control”.• Activate the remote control pendant. See informationin the separate user manual supplied by themanufacturer.• Release the Emergency Stop by pressing the Horn/Reset (14). The horn will sound.• Switch the selector switch “Outrigger/Boom” (8) to“Boom” and uncap the Emergency Stop button.• The 50%/100% switch (10) controls the boom speed,50% when pumping, 100% when deploying / stowing.• Press the master switch “Deploy boom element A / Slew boom” (3) and deploy boom element A until the catchhook releases and the boom element B can be deployed (see Fig. 7.12).• Press the master switch “Deploy boom element A / Slew boom” (3) to move the distributor boom into theposition where the discharge hose retainer can be opened.• Press the master switch “Deploy boom element B” (2) and deploy boom element B until it is approx. 120º toboom element A (see Fig. 7.14).• Use the joystick “Deploy boom element C and D” (1) to deploy boom element C to 90º to boom element B (seeFig. 7.15).• Use the joystick “Deploy boom element C and D” (1) to deploy boom element D to 90º to boom element C (seeFig. 7.15).• Position boom element D horizontally approx. 1 m above the ground.• Open the catch and release the discharge hose (see Fig. 7.17).• Use the joystick s(1 to 3) on the radio remote control to move the distributor boom to the desired workingposition.1014 8 31 2Fig. 7.18 Controll. the distrib. boom from the radio remote control pendant
