Sound Parameters – Effects99 Waldorf Q User’s ManualFX1 TypeBypassFX2 TypeDelay The 5.1 Delay Types are only available on the FX2 unit.BypassDisables the effect unit. No further parameters available.ChorusA Chorus effect is generated by using Comb filters that generate slightly detuned copies of the inputsignal and mixing it into the output signal. The result sounds like an ensemble of several sounds at thetime, as a choir in opposite to a single voice, hence the name Chorus. The detuning is generated byan internal LFO that can be controlled in speed and depth. The Chorus’ high frequency output can bedampened with the Cutoff parameter. A Mix setting of 48 to 96 produces the strongest effect because both the unaffected signal andthe processed signal are mixed together.Speed | Depth064 | 064Speed 0…127Sets the LFO speed of the Chorus effect.Depth 0…127Sets the modulation depth of the Chorus effect.Delay 0…127Delay064Sets the initial delay that is added to the Chorus delay line.FlangerThe Flanger effect is very similar to the Chorus effect but features a feedback circuitry to feed thegenerated signal back into the comb filter. This generates a deeper detuning and colorizes the signal.With extreme settings you can hear a whistling sound which is very characteristic for a Flanger effect. A Mix setting of 48 to 96 produces the strongest effect because both the unaffected signal andthe processed signal are mixed together.
