Waldorf RN8410G Installation And Operation Manual

Also see for 800 SERIES: Operation manual Installation and operation manual Installation and operation manual Installation and operation manual Installation and operation manual

Waldorf RN8410G Installation And Operation Manual Manual pdf 14 page image

12OperationGriddleThese griddles are fitted with a pilot as a standard option and Flame Failure Protection, which isincorporated by way of a thermo-electric system for each main burner. Flame Failure Protection will shutoff gas supply to burner in the event that pilot for that burner goes out, so that un-burnt gas is notexpelled.This is an important safety feature which is slowly becoming law throughout theworld.Lighting the Griddlea. Depress gas control knob and rotate anti-clockwise to ‘PILOT’ position.b. With gas control knob depressed, press piezo ignition button to ignite pilot burner. Repeat Items1 to 2 until pilot is lit.c. Release gas control knob approximately 10-20 seconds after lighting pilot.d. Pilot should now remain alight - if not, repeat Steps (a to (c above.e. ‘Full Flame’ can now be achieved by depressing and rotating gas control knob anti-clockwise tofirst stop.f. Low flame can be achieved by depressing gas control knob and rotating fully anti-clockwise to‘Low Flame’ position.g. When main burner is not required, depress and turn gas control knob clockwise to ‘OFF’ position.Turning 'OFF' the Griddle Burner / Pilota. To turn 'OFF' griddle, but keep pilot burner alight, rotate gas control knob to 'PILOT' position.Griddle burner will extinguish and pilot will remain alight.b. To turn 'OFF' the 'PILOT', depress and turn gas control knob clockwise back to ‘OFF’ position.'PILOT' burner will extinguish.Griddle plate temperature reaches over 300°C in hottest points during normaloperation at 'Full Flame' setting.Caution