Walker A10 Operator's Manual
Also see for A10: Operator's manual
                        | |
10Assembly I nstructions5. Attach the lift lever to the carrier frame andtighten hardware as shown in Install Lift Leverphoto and Install Lift Lever CompressionSpring photo so that 2 - 3 threads protrudethrough the ESNA nut.Place OverPivot StudInstall Boltand WasherInstall Lift LeverInstall Springand ESNA NutFriction WasherP/N 5141-5(Not Visible)Install Lift Lever Compression SpringATTACH DETHATCHER TO DECK1. Select a smooth, flat surface such as a driveway,sidewalk, garage floor, etc. It is a simple proce-dure for attachment, with no tools required.2. Hook the rear legs of the dethatcher under thefront of the deck carrier frame as shown inAttach Dethatcher to Deck Carrier Frame,and slide the channel mounts out to the deckcarrier frame arms.Rear Leg Hooked onDeck Carrier FrameSlide Channel Mountout to Carrier FrameAttach Dethatcher to Deck Carrier Frame3. Once the channel mounts are attached to the car-rier frame arms, install the lock pins as shown inInstall Lock Pins to Channel Mounts photo.The dethatcher should be centered between thecarrier frame of the deck.Install LockPinInstall Lock Pins to Channel Mounts4. To remove the dethatcher, reverse the installationprocess. |
Related manuals for Walker A10
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine