Wallbox COMMANDER 2 User Manual

Also see for Commander 2: Installation and user guide Manual Installation guide Installation guide Installation guide

16EthernetAutomatic network configurationis enabled by default in this optionvia DHCP so the charger will obtainand set the network parametersautomatically, provided that the net-work has an active DHCP server.It is also possible to set these networkparameters manually.WiFiTo connect the charger to a WiFi network it is necessary to switch on the charger's WiFi connection by pressingthe Enable button. Then select the network you want to connect to from the dropdown list of available networksand enter the password for the WiFi network. Press the Save button to save the configuration and connect. Thecharger will connect to the network and the WiFi icon will be displayed. The number of bars on the icon indicatesthe quality of the link.The use of some specialcharacters in the name orpassword of the WiFi networkmay not be supported.