Wallbox COPPER S Installation Manual

Also see for Copper S: Installation and user guide

Contents

12EN5. Closure of the device (I-6.1, I-6.2)Step 5.1: Reconnect the ribbon cable to the cover.Step 5.2: Close the front cover, taking special carewith the fitting and ensuring that the O-ring remainsin place. Then tighten the nine screws.Step 5.3: Secure the frame by tightening the Torxscrews.I-6.1I-6.2Step 6.3: Add yourcharger by clicking on the“+” button on the mainpage, introduce the SNand UID of your charger.Step 6.2: Log-in using youraccount.At this point the Copper is registered in myWallbox.To further configure the network as IT follow thenext steps:Step 6.4: Enter Wallbox App and select yourcharger from the charger list.6. Configuring IT networkStep 6.1: Download the Wallbox App available fromAndroid Play Store or Apple App Store.