Wallbox COPPER S Installation Manual

Also see for Copper S: Installation and user guide

Contents

8EN• The power supply line must be wired to an existing installation and be in accordance with local regulations.• The charger must be electrically protected by installing externally a Miniature Circuit Breaker (MCB) anda Residual Current Circuit Breaker (RCCB).Electrical ProtectionRecommended protections, take also into account the local regulations.MCB: maximum value according to the maximum output current of the load point.RCCB: According to local regulations, Type A or Type B.Installation InstructionsThe installation of the Wallbox should be undertaken by a qualified electrician in accordance with theapplicable standards and regulations. Preferably the installation should be undertaken by a Wallbox trainedinstaller. Local regulations on electrical installations, fire prevention, and accidents as well as emergency exitsimplemented from installation must be taken into account.Flammable, explosive, or combustible materials.Chemicals or solvents.Gas pipes or steam outlets.Heat emitters such as radiators or batteries.Areas prone to flooding, running water or humid environments.Please contact an electrician or arrange installation at your premises with your local distributor.Precautions• Take special care when selecting the mounting surface. It must be able to adequately support the weightof the charger and withstand the mechanical forces associated to charger use.• The power supply connection must comply with the standards and regulations for cabling and buildinginfrastructure.• The Wallbox charger must be permanently connected to the electrical earth of the installation.• Before installing or cleaning your Wallbox make sure that the power supply is switched off and there is nopower in the system.• The charger must be installed in a sufficiently ventilated location to ensure it remains cool.• Always bear in mind the operating temperatures of the device.• It is recommended to avoid installation in areas where there is direct sunlight to prevent overheating anddeterioration of the device.• Do not install your Wallbox charger near: