Wallbox COPPER S Installation Manual

Also see for Copper S: Installation and user guide

Contents

13Step 6.5: Enter inthe System menu inthe top right corner.Step 6.6: Enterin the InstallationOptions menu.Step 6.7: Enable theIT network button.Power Sharing SmartIf your charger is going to be part of a Power Sharing Smart infrastructure, please be sure you havethe instructions to perform this installation. In case of any doubt contact your sales agent.StartupOnce the assembly process has been completed your Wallbox Copper S is ready to be used.However, please review the information below in detail before beginningto operate your WallboxCopper S:User GuideFollow the User Guide to begin setting up your Wallbox.• Do not use your Wallbox Copper S for purposes not described in the section Product Description.• Never open the cover of your charger when it is connected to the power supply.• Special precautions must be taken with electronic implants. Please contact your medical devicemanufacturer to find out the potential effects that the charging process may cause to it.• Review and confirm all the steps that have been carried out.• Available at https://wallbox.comPower BoostIf your charger is going to be part of a Power Boost, please be sure you have the instructions toperform this installation. In case of any doubt contact your sales agent.