Support Email/ Skype: service2@wansview.com 515.4.8 Local Configuration5.5 Mac Web AccessFor specific setup steps, please refer to section 5.3.If no CD drive is available on a Mac computer, please log into the officail websitehttp://www.wansview.com/Service/download/23.html to download the search tool. The icon of the search tool is:1. When accessing the camera via Mac, the following menu bar will not be available for camera setting.2. No motion detection box is available under mode 1 or mode 2. Click Window 1, it will show the full screen motion detectionbox.3. When accessing the camera via Mac, no local storage path is available.Enter "Local Configuration". You can set the savepath for videos and pictures on your PC as well asthe recording duration.Reminders:1: When using IE9 or higher, please run thebrowser video path and picture path as "administrator" so that you can save the filessuccessfully. The default video path is "HYRec"on disk C. The default picture path is “HYSnap”on disk C.2: The user can start up the Motion DetectionAlarm and view the flashing box on the screen.