User and Group Management190 Firebox X Edge e-SeriesAbout user accountsWhen you create a local user for the Firebox X Edge e-Series, you select the administrative access level for thatuser. You select access control for the external network and the Branch Office VPN tunnel, and time limits onthis access. You also can enable Mobile VPN with PPTP, enable Mobile VPN with SSL, add a WebBlocker profileto the user account, and configure the user’s Mobile VPN with IPSec settings.Three levels of Administrative Access are available for the Firebox X Edge: None: This level allows users to connect to resources on the external network. A user who uses thisaccess level cannot see or change the Edge configuration pages. Read-Only: Use this level for users who need to see Edge configuration properties and status. A userwho uses this access level cannot change the configuration file. Full: Use this level for users who can see and change Edge configuration properties. You also canactivate options, disconnect active sessions, restart the Edge, and add or edit user accounts. A user whouses this access level can change the password for all user accounts.Configure an individual user account1. To connect to the System Status page, type https:// in the browser address bar, and the IP addressof the Firebox X Edge trusted interface.The default URL is: https://192.168.111.12. From the navigation bar, select Firebox Users.The Firebox Users page appears.3. Below Local User Accounts, click Add.The New User page appears. It shows the Settings tab.
