User Guide 191User and Group Management4. In the Account Name field, type a name for the account. The user types this name to authenticate. Theaccount name is case-sensitive.5. In the Full Name field, type the first and last name of the user. This is for your information only. A userdoes not use this name to authenticate.6. In the Description field, type a description for the user. This is for your information only. A user doesnot use this description to authenticate.7. In the Password field, type a password with a minimum of eight characters. Mix eight letters, numbers,and symbols. Do not use a word you can find in a dictionary. For increased security use a minimum ofone special symbol, a number, and a mixture of uppercase and lowercase letters.8. Type the password again in the Confirm Password field.9. In the Administrative Access drop-down list, set the level to which your user can see and change theFirebox X Edge configuration properties: None, Read-Only, or Full.10. In the Session maximum timeout field, set the maximum length of time the computer can send trafficto the external network or through a Branch Office VPN tunnel. If this field is set to zero (0) minutes,there is no session timeout and the user can stay connected for any length of time.11. In the Session idle timeout field, set the length of time the computer can stay authenticated when itis idle (not passing any traffic to the external network, through a Branch Office VPN, or to the FireboxX Edge itself). A setting of zero (0) minutes means there is no idle timeout.12. If you want this user to have Internet access, select the Allow access to the External Network checkbox. You must require user authentication for this setting to have an effect.13. If you want this user to have access to computers on the other side of a Branch Office VPN tunnel, selectthe Allow access to manual and managed VPN tunnels check box. You must require userauthentication for this setting to have an effect.14. If you want this user to be able to use Mobile VPN with PPTP to the Edge for secure remote access,select the Allow Remote Access with Mobile VPN with PPTP check box. You must also enable PPTPon the VPN > Mobile VPN page for Mobile VPN with PPTP to work.15. If you want this user to be able to use Mobile VPN with SSL to the Edge for secure remote access, selectthe Allow Remote Access with Mobile VPN with SSL check box. You must also enable WatchGuardMobile VPN with SSL on the VPN > Mobile VPN with SSL page.16. Click Submit.Require users to authenticate to the EdgeWhen you configure user authentication, you can choose to have users see the login dialog box automaticallywhen they open their web browser. If you do not use this setting, users must use this procedure toauthenticate:1. Open a web browser. You can use Mozilla Firefox, Microsoft Internet Explorer, or Netscape Navigator.You can use other web browsers, but this is not supported. You must enable JavaScript and allow pop-up windows from the Firebox X Edge in your web browser to authenticate.2. To connect to the System Status page, type https:// in the browser address bar, and the IP addressof the Firebox X Edge trusted interface.The default URL is: https://192.168.111.13. A security dialog box appears. Accept the warning to continue.4. Type your user name and password. If you use a third-party authentication server, such as ActiveDirectory or RADIUS, you must type in the user name in the form of: domain\user.
