WaterMAXX WWD224W-2 Use & Care Manual
                            | |
FREqUENTlY ASkED qUESTIONSq: Why is my water dispenser leaking?A: If you are experiencing a leak with your water dispenser please do the following to see if the water bottle or thedispenser is leaking.1. Unplug the power cord and remove the bottle.2. Remove the bottle support collar and check the water level inside the reservoir – it should be at roughlythree - quarters full.3. Closely monitor the water level inside the reservoir, (1-2 hours) if the water level drops, immediately drain theremaining water from the unit and call customer service at 1-866-253-0447. If the water level remains constant it isthe water bottle not the dispenser that is leaking. Please contact your water supplier for a replacement bottle.q: Why do I get a plastic taste from my dispenser?A: As with most new appliances such as coffee makers and kettles, there is often a plastic taste upon initial start-up ofthe unit. To remove this taste, simply follow the cleaning instructions outlined in Cleaning the Inside of theDispenser.q: What is the spike that goes into the bottle?A: WaterMAXX® water dispensers feature a “piercing valve” as part of the bottle support collar, providing addedconvenience for water bottle installation. Depending on the water bottle supplier, a small opening may or maynot be present in the bottle cap for this specific purpose. If the piercing valve opening is not present, the entirebottle cap must then be removed to eliminate possible damage to the piercing valve. If the opening is present,remove the protective seal prior to installing the bottle.8 |
Related manuals for WaterMAXX WWD224W-2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine