23MANUFACTURER’S DECLARATION OF CONFORMITYGarage Door Models: Wayne-Dalton Optimal, Wayne-Dalton Confort, Wayne-Dalton Diffusion, Wayne-Dalton Prestige+/40mm/Pinnacleis in conformity to the applicable sections of Door Standards EN 292, EN 294, EN 349, EN 418, prEN894, EN 1037,EN 1088, EN 12424, EN 12444, EN 12453, EN 12604,EN 60204-1Per the provisions & all amendments of the EU Directives 73/23/EEC, 89/336/EEC, 89/392/EEC, 89/106/EECDeclaration of ConformityThe above listed garage door models, when installed and maintained according to all the Manufacturer’s Instructions, meet the provisions of the abovelisted EU Directives and all amendments.I, the undersigned, hereby declare that the equipment specified above, as well as any accessories to such equipment listed in the Notes of Installation,Use, and Maintenance conform to the above listed Directives and Standards.Signature of manufacturer:François Médart – President Wayne-Dalton Europe November 10, 2005Place: Wayne-Dalton Europe1 rue Maurice Hollande51100 Reims, FrancePlease Do Not Return This Product To The StoreQuestions?Need Information?Visit our website:www.waynedaltoneurope.comThank you for your purchaseModels: Wayne-Dalton Optimal, Wayne-Dalton Confort, Wayne-Dalton Diffusion, Wayne-Dalton Prestige+/40mm/PinnacleCovered under one or more of the following U.S. patents:D413,055/D413,579/D413,867/D421,031/D466,141/D472,568/D472,910/D473,573/D473,574/D474,215/D475,146/5,259,143/5,408,724/5,409,051/5,419,010/5,929,580/5,931,212/6,078,249/6,145,570/6,164,014/6,253,824/6,263,947/6,325,134/6,326,751/6,326,754/6,401,792/6,442,897/6,561,255/6,561,256/6,568,454/6,605,910/6,588.156/6,640,872/6,667,591/6,672,362/6,739,372/6,899,157European Patent: EP0975417 other U.S. and foreign patents pending.