Wayne-Dalton Optimal Installation, User Operation & Maintenance Manual

Also see for Confort: Installation, user operation & maintenance manual

Wayne-Dalton Optimal Installation, User Operation & Maintenance Manual Manual pdf 5 page image

5Note: Use these Notes of Installation, Use, and Maintenance in conjunction with the Drawings of Installation, Use, and Maintenance to perform theinstallation. The following letters & numbers in parenthesis, [example: (A1)] cross reference items listed in each diagram of the Drawings of Installation,Use, and Maintenance manual.PACKAGE CONTENTSPACKAGE CONTENTS “A” (SEE PAGE 2 OF DRAWINGS OF INSTALLATION, USE AND MAINTENANCE MANUAL)CALL OUTS PARTS QUANTITYA1 Pre-assembled Door 1A2 Horizontal Track 1 pairA3 Entrapment Label 1A4 Spreader Bar Assembly * 1[*Attached to the bottom door section during packaging]A4.1 Spreader Bar 1A4.2 Slider Bars ** 2A4.3 “L Bracket ** 2[**Attached To Spreader Bar]A5 “L” Bracket 2A6 Ø 6 x 15 mm (1/4” - 20 x 9/16”) Track Bolt 10A7 Ø 6 mm (1/4” – 20) Flange Hex Nut 10A8 Ø 8 x 40 mm (5/16” x 1-5/8”) Lag Screw 13A9 Molded Transition Track 1 PairA10 Anchors 13 (not supplied)A11 Disconnect label 1A12 Wall Station assembly : 1 (Supplied according to the model)A12.1 Base 1A12.2 Cover/Button assembly 1A12.3 Circuit Board 1A12.4 Phillips Head Screws 2A12.5 Battery 1A13 Remote Transmitter 1A14 Wall Station reference label 1(Supplied according to the model)A15 Light Fixture 1(Supplied according to the model)TOOLS REQUIRED “B” (SEE PAGE 2 OF DRAWINGS OF INSTALLATION, USE AND MAINTENANCE MANUAL)CALL OUTS PARTS QUANTITY CALL OUTS PARTS QUANTITYB1 Electric Drill (With Clutch) 1 B8 Screw Driver (Flat Head) 1B2 5 mm (3/16”) Drill Bit 1 B9 Step ladder 1B3 Level 1 B10 Safety Glasses 1B4 Ratchet Wrench 1 B11 Gloves 1B5 75 mm (3”) extension 1 B12 11 mm (7/16”) Hex Head Driver 1B6 11 mm (7/16”) Wrench 1 B13 Screw Driver (Phillips Head) 1B7 Tape measure 1