Wood Stone PHOENIX 3030 Installation And Operation Manual

Also see for PHOENIX 3030: Service manual Installation and operation manual

Phoenix Installationand Operation ManualPG 31 OF 40M0029�09 SEPTEMBER 2017An ongoing program of product improvement mayrequire us to change specifications without notice.WOOD STONE CORPORATION1801 W. Bakerview Rd.Bellingham, WA 98226 USATEL +1.360.650.1111FAX +1.360.650.1166E-MAIL info@woodstone-corp.comwoodstone-corp.comTROUBLESHOOTING GUIDEController will not turn onFlame does not lightFlame cuts outDisplay reads “OPEN”1. Incoming power to oven turned off� Check circuit breaker for circuitsupplying the oven� Check that any wall switches external to the oventhat control oven power are turned on� Check that any interlocks externalto the oven are turned on�2. If controller still does not turn on, please contact Wood Stone forassistance�1. Debris in burner�2. Oven is being run with the night door in place� Night Heat Retention Doormust be removed whenever the oven is turned on�3. Wind blowing into the oven, or other venting issues�1. Thermocouple is not plugged into control box�2. Damaged thermocouple� Contact your distributor for assistance�PROBLEM CAUSE/SOLUTION1. Check gas is turned on to the oven, and gas shut-off valve is turned allthe way on�2. Debris in burner� Burner may require cleaning� Contact your distributorfor assistance�3. Damaged igniter or gas valve� Contact your dealer for assistance�If the oven is being started for the first time:- Has all air been bled from the gas line?- Is the switch on the SV-2 and SV-3 valve in the ON position?NOTE: Valves are locate on the back of the control box, beneath theoven�