Wood Stone WS-DO-5048 Installation And Operation Manual

Contents

Duck Oven Installation and Operation Manual6An ongoing program of product improvement m ay require us to changespecications without notice. DO-5048, Revised February 2015.Doc no: M0052.04info@woodstone-corp.com or visit woodstone-corp.comwood stone corporation1801 w. bakerview rd.bellingham, wa 98226 usatf. 800.988.8103t. 360.650.1111f. 360.650.1166SPECIFICATIONSUTILITIES SPECIFICATIONSGas: 3/4 inch gas inlet (FNPT)100,000 BTU/hr Natural Gas (NG)OR100,000 BTU/hr Propane (LP)Maximum gas inlet pressure1/2 psi (14 inches W�C�)Plan viewPlan view w/door swingFront viewSide viewVenting: The WS-DO-5048 must be vented with aListed Type 1 exhaust hood, or one constructed inaccordance with NFPA 96 and all relevant local andnational codes� The oven must be vented in accordancewith all relevant local and national codes, and in amanner acceptable to the authority having jurisdiction�Important: “-W” models must be vented as solid-fueloven�Electrical120 VAC, 1 A, 60 HzOptional: 240 VAC, 1 A, 60 HzUtility connection locations as shown�Remove front service panel for access� Useside utility knockouts (provided) to routeutilities�Refer to data plate when installing.Actual weight:2,830 lbs.Shipping weight:3,300 lbs.Air intake: Do notfacade or coveroverMust be leftremovable forserviceREV:LEGEND:PART #: 001-5050485048 Duck OvenGeneral Arrangement10/14/2013 bena 4DWN BY:SHEET:oodstone-corp.comIN INCHES[±10mm], ANGULAR ±2°THERWISEPRODUCT IMPROVEMENTNGE SPECIFICATIONSOTICE.DATE:1 of 1AIRINTAKEG49 1/2"1260mm27 3/4"700mm25"640mmng10 1/2"260mm4"100mm53 3/4"1360mmR 23 1/2"600mmService Panel Swing23 1/4"590mm23 1/2"600mm26 1/2"670mm3 3/4"90mm23 1/2"600mm33 1/4"840mm12 1/2"320mmG34"860mm1"30mm1 1/4"30mm7 1/4"190mmPART #: 001-5050485048 Duck OvenGeneral Arrangement10/14/2013 benaDWN BY:SHEET:A 360/650-1111 www.woodstone-corp.comDIMENSIONS ARE IN INCHESNCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°UNLESS NOTED OTHERWISEDATE:1 of 1AIRINTAKEG49 1/2"1260mm27 3/4"700mm25"640mmR 11 3/4"300mmHearth Door Swing10 1/2"260mm4"100mm53 3/4"1360mmR 23 1/2"600mmService Panel Swing23 1/4"590mm23 1/2"600mm26 1/2"670mm3 3/4"90mm23 1/2"600mm33 1/4"840mm12 1/2"320mmG34"860mm75"1910mm26 1/2"670mm1"30mm1 1/4"30mm7 1/4"190mmLEGEND:PART #: 001-5050485048 Duck OvenGeneral Arrangement10/14/2013 benaDWN BY:SHEET:A 360/650-1111 www.woodstone-corp.comDIMENSIONS ARE IN INCHESNCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°UNLESS NOTED OTHERWISEING PROGRAM OF PRODUCT IMPROVEMENTEQUIRE US TO CHANGE SPECIFICATIONSWITHOUT NOTICE.DATE:1 of 1AIRINTAKEG49 1/2"1260mm27 3/4"700mm25"640mmR 11 3/4"300mmHearth Door Swing10 1/2"260mm4"100mm53 3/4"1360mmR 23 1/2"600mmService Panel Swing23 1/4"590mm23 1/2"600mm26 1/2"670mm3 3/4"90mm23 1/2"600mm33 1/4"840mm12 1/2"320mmG34"860mm75"1910mm26 1/2"670mm1"30mm1 1/4"30mm7 1/4"190mmREV:PART #: 001-5050485048 Duck OvenGeneral Arrangement10/14/2013 bena 4DWN BY:SHEET:oodstone-corp.comIN INCHES[±10mm], ANGULAR ±2°THERWISEDATE:1 of 1AIRINTAKEG49 1/2"1260mm27 3/4"700mm25"640mmng10 1/2"260mm4"100mm53 3/4"1360mmR 23 1/2"600mmService Panel Swing23 1/4"590mm23 1/2"600mm26 1/2"670mm3 3/4"90mm23 1/2"600mm33 1/4"840mm12 1/2"320mmG34"860mm1"30mm1 1/4"30mm7 1/4"190mmAir intake