Wood Stone WS-MH-RFG-IR Installation And Operation Manual

Also see for Mt. Adams WS-MS-5: Installation instructions

Contents

Wood Stone WS-MH-RFG-IR Installation And Operation Manual Manual pdf 9 page image

Questions? Call Wood Stone at 800-578-6836 9MH-RFG-IR Installation and Operation ManualSeptember2006ELECTRICALHave a licensed electrician wire the transformer terminal strip with a120V, 15 amp lead. Electrical diagrams are located directly to the right, behindthe removable service/intake panel of the appliance as well as inside the controlbox and also on page 24 of this manual. Also, see the figure on page 14 of thismanual for location of the transformer enclosure.Electrical Code LimitationsELECTRICAL GROUNDING: This appliance must be electrically grounded in accordancewith local codes, or in the absence of local codes, with the National Electrical code, ANSI/NFPA 70 or the Canadian Electrical Code, CSA C22.1 as applicable.WARNING FOR APPLIANCES EQUIPPED WITH A POWER CORD: If this appliance wasprovided with a cord, the cord is equipped with a 3 prong grounding plug for your protectionagainst shock hazard and should be plugged directly into a properly grounded receptacle.Do not cut or remove the grounding prong from the plug.ELECTRICAL SPECIFICATIONS