Inserting title cardsPRINCESS – Edition: 17.02.2005 9OPERATING INSTRUCTIONS2.4 Inserting title cardsAfter inserting the CD it is recommeded to insert theappropriate title card into the paternoster book at thesame time. Run through the book pages by means ofthe two push buttons.To remove the cabinet lid bend both springs to out-side.Now you can take out each page.Insert the title cards as shown in the picture. After in-serting a page turn it forward and backward once tocheck its propper function.If the page system works properly the red LED lightscontinuously. A blinking LED indicates the followingerrors:1x - LH light gate indicates an error, or is defective2x - Lead through gate indicates an error, or isdefective3x - RH light gate indicates an error, or is defective4x - no or to slow page transport5x - no zero page identificationLED blinks continuously: BCD-switch adjustment out of range 0 to 120.push buttons4 40011223377BBFFAAEE6655DD9988CCred LED
