XVision X2C4000 User Manual
                                                           | |
Contents
| 
10Device ConnectionThere are two types of connection method:1. Connect the IPC with your PC.For a direct connection you will need to use a CAT5/6 Cross over cable. You will stillneed to provide power to the IPC, this can be done with a 12v Dc power supply or aPOE Injector.Both IPC and your PC will need to be in the same IP subnet e.g. IPC 192.168.1.168(Default), PC 192.168.1.100.2. Connecting the IPC to your Router/Switch.This is the most commonly used way to connect the IPC to your network.You will need a CAT5/6 Patch cable, connect this to your IPC and your router/switch. If youhave a POE switch you can connect this directly from your IPC to your switch and the IPCwill receive power as well. If you do not have a POE switch you will need to provide power toyour IPC. |
Related manuals for XVision X2C4000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine