XVision X2C4000 User Manual

XVision X2C4000 User Manual Manual pdf 46 page image

43PEA (Perimeter Alarm)Here you can enable the PEA. Switch: Enable-on, Disable-off. Latch Time: Continued alarm output time after trigger alarm, the optional time can be10S，20S，40S，60S，unit is seconds. Post Recording: Continued record time after trigger alarm finished, the optional timecan be 10S，20S，40S，60S，unit is seconds. Sensitive: The parameter range is 0~4，the default value is 2. If set the sensitive ishigher, the object to be monitored is easy to detect, but also it may give you morefalse triggers. Scene: Scene setup, Indoor, Outdoor. Enable I/O Out: Trigger alarm if with I/O output. Send Email: When the alarm is triggered, then an email will be sent to notify. You willneed to enable the email function and server information, you can find this in (RemoteSetting-Network-Email). Record Channel: Record this channel. Rule Number: Rule Number, maximum 4. Rule Switch: Every rule switch, Enable-on, Disable-off.