XVision X2C4000 User Manual
                                                           | |
Contents
| 
2IntroductionThis guide is for the Xvision Pro HD X2C4000 Range of IP Cameras.It is recommended that the units are setup and tested before being mounted or installed.These instructions are for guidance only detailed information is in accordance with theproduct.The instructions may include some technical inaccuracies or typographical errors, thesewill be corrected in future updates.The product or procedures described in the instructions may be changed or updated atany time without prior notice. Screenshots used in the instruction are only for indicationsand explanations.Screenshots used in the instruction are only for indications and explanations.This Manual will cover the following:• Schematic Diagram of XC Cameras• Basic setting setup• Setting an IP address• Active X Controls• Viewing on IE• SpecificationsPre-requisitesNote before you begin installation:• Connect only one X2C400 range IPC at a time to your LAN, as allcameras share the same default IP 192.168.1.168• Screw Drivers• Router/Switch/Hub for your LAN, this is needed to connect all Network IPequipment together.• A Windows PC/Laptop on site connected to the same LAN(Router/Switch) as your equipment.• Cat 5 Patch cables to connect your X2C4000 and Router/Switch alltogether |
Related manuals for XVision X2C4000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine