XPR16H - User Manual624.8 P.T.Z ConfigurationP.T.Z configuration includes two submenus: “Serial Port” and “Advanced”Setting up Serial Port:o Step 1: Go to Main Menu > Setup > P.T.Z > Serial Port (tab) (refer to Fig 4-42):Fig 4-42o Step 2: Select the relevant cameras that you want enabled for P.T.Z.o Step 3: Setup the corresponding P.T.Z details for each selected camera including the Address (i.e. Camera ID), BaudRate and Protocol.o Step 4: Users can setup all channels with same parameters by selecting the “All” check-box and then the relevantP.T.Z settings.o Step 5: Click “Apply” to save any changesNote: The P.T.Z protocols supported by this DVR include the following: NULL, PELCO P, PELCO D, LILIN, MINKING,NEON, STAR, VIDO, DSCP, VISCA, SAMSUNG, RM110 and HY
