XVision XRN0808E Quick Setup Manual
Also see for XRN0808E: User guide
                                | |
Contents
| 
XRN Quick Setup GuidePRO16www.xvision.com1. Click “√” in front of “Enable” option at the channel item you wish to add.2. Select relevant protocol for our cameras it is I8 or you can use Onvif.3. Input the IP address4. Input the port number5. Input the user name6. Input the IP Cameras password,7. Finally click “Save”5.3 Manual AddPlease NoteYou must add the user name and password if the IP camera requires this, or you will get no image.5.4 Camera Setting AdjustTo change any of the settings on the IP camera automatically, double-click the IP cameras in the left windowto access the parameters. Then input relevant changes and click ‘Save’ to finish. The following parameterscan be changed on the unit:• Enable: Select the relevant channel, check “Enable”• Protocol: ONVIF Standard protocol/ I8 Private protocol/ I9 Private protocol/ RTSP Standard protocol forselection• IP Add: Edit and modify the IP address manually• Port: Edit and set the relevant port number• Stream Type: Select “Main Stream” or “Sub Stream”• Network Type: Select “TCP” or “UDP”• User: Input the user name• Password: Fill the password in the password field |
Related manuals for XVision XRN0808E
manualsdatabase
Your AI-powered manual search engine