XVision XRN0808E Quick Setup Manual
Also see for XRN0808E: User guide
                                | |
Contents
| 
XRN Quick Setup GuidePRO8www.xvision.com1. When the lid is removed you will see silver racks. Remove the Red SATA cables, SATA power Molex andthe screw bag from your accessories box which came with your XRN2016/3625 as pictured below.2.4 XRN2016/3625 HDD Install2. Take out your screw driver and remove the screws holding the rack in place.3. The XRN2016 will have one level and the XRN3625 will have two levels for mounting hard drives. Placeyour hard drive on the underside of the rack (shown below) and secure in place using the screws that camein the accessory box.4. Once in place, connect your SATA and Molex cable to the hard drove and your XRN motherboard.Please NoteThe user needs to be familiar with handling hard drives or get a qualified person to install. Y3K will not beliable for any damage caused to the unit in the process of installation. |
Related manuals for XVision XRN0808E
manualsdatabase
Your AI-powered manual search engine