XVision XRN0808E Quick Setup Manual
Also see for XRN0808E: User guide
                                | |
Contents
| 
2.5 Connection GuideUSBMouse*PSUHDMI toMonitor*HDDUSB2.0*RouterNetworkSwitchPoE SwitchPSU XC CameraWindowsPC/Laptop*LANVGAto Monitor*HDDESATA*XC CameraOptional**** If adding more than one XRN/XC deviceXC Camera****** XC1080 range PoE. XC720 requires a PoE splitter/injector/PSUPSUNetwork Cable* Required but not suppliedOptional**1 Connect either your VGA */HDMI * cable to your XRNand the other end of the cable to your monitor.2Place the Ethernet (CAT 5) patch cable next to yourXRN and then the other end to your Switch*/Router* .Please remember not to plug into your XRN unit yet.3 Next plug in the Mouse* to one of the 2 available USBports.4 Next, plug in you’re chosen recording hardwareeither ESATA* or USB2.0 HDD* .5 To power the unit, connect the PSU to the micro USBon the XRN.6Finally, turn your power source on, press thebutton on the top of the XRN0808E marked ‘Power’.For the other XRN there is an on/off at the backof the units.InstructionsScenario 1*Scenario 2Scenario 3PSUKey:Power SupplyVGA or HDMI CableNetwork CableUSB Cable |
Related manuals for XVision XRN0808E
manualsdatabase
Your AI-powered manual search engine