the system to automatically overwrite over old data if you have not set up the HDD MinimumStorage alarm in the Motion Detection Configuration menu. Please refer to chapter 4.5 for details.Internet Config TabRead more about this tab in chapter 7 Remote Surveillance and Playback.PC Auto Reboot TabThe windows system may become unstableafter a couple of days continuous operation.You should reboot the PC/laptop regularly toavoid the SmartDVR system from becomingunstable. In the following area of the BasicConfiguration page, you can input yourcomputer’s user name and password in the relative boxes. You can select and set the interval byday, which will guide the system to reboot automatically according to the setup. When restartingthe PC/laptop, the SmartDVR system will access the system automatically with details you enter.4.2 SCHEDULE CONFIGURATIONClick to enter the Schedule Configurationpage. The XUSB4DVR SmartDVR system offerspowerful schedule configuration options. Everychannel has three kinds of record modes:Schedule Record, Motion Detection Recordand Sensor Alarm Record.You can set schedules from Sunday to Saturdayseparately for all of the three record modes.Sensor alarm record mode has the highest priorityamong all record modes. To edit the schedule for achannel, select the camera name within one of thethree record mode groups, select the colour bars on the right side, then select ‘Edit’. Alternatively you canclick ‘Add’ to add schedule for a certain channel (as shown in Fig 4.5). Click ‘Delete’ to delete schedule.Click ‘Clear All’ to delete all the schedules of a certain channel.4.3 VIDEO CONFIGURATIONClick to enter the video configuration page.Users can change the values of correspondingsettings for each camera by selecting it from thedrop down menu. You can adjust the Contrast,Brightness, Hue and Saturation by moving thescroll bars. To return to the default settings, click‘Defaults’.17 XUSB4DVR User GuideFig 4.3 PC Auto Reboot tabFig 4.4 Schedule Configuration & Edit Schedule detailFig 4.5 Video Configuration