XVision XUSB4DVR User Manual
Also see for XUSB4DVR: Quick guide
                                                    | |
Contents
| 
7.1 REMOTE LIVE SURVEILLANCEThe XUSB4DVR surveillance system supports Remote Surveillance through LAN, Internet and Intranet.Simply enable the web cam function of the system on a computer which is connected to Internet, andthe computer system will become an Internet web cam server. To view remotely on any other computerthat connects to Internet or the same LAN network, simply input the SmartDVR server address in IEbrowser to view high quality real time image from the server and also control any connected P.T.Zdevices.7.1.1 Remote Surveillance ServerConfigurationYou should firstly enable the Web Camera Servicesin Basic Configuration (refer to Fig 4.1) and setother settings as below:HTTP PortWeb service & download service port,default value is 80Data PortData transmission port, default value is 1159Command PortControl command port, default value is 1259Picture QualityDefault value is higher7.1.2 Remote Surveillance Client-side SetupOn the client-side, you should first install theWebCam program. This can be accessed byentering the IP address of your PC or laptop intoInternet Explorer (see note below).This page will appear:Live SurveillanceThis option is for users to see live cameraimages remotely.Remote PlaybackThis option is for users to play back recordedfiles.31 XUSB4DVR User Guide7 REMOTE SURVEILLANCE & PLAYBACKFig 7.1 Web Cam Server configurationFig 7.2 Remote surveillance and playback services selectionPlease Note: In case the HTTP port setting is not 80, (80 is the default setting) when you input the server IPaddress, you should add the port number after the IP address. For example, the server’s IP address is211.148.96.234, and the port number is 81, then you should input http://211.148.96.234:81. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine