4.8.2 View the mapClick to enter E-map, where you can view thedistribution of all the cameras in the map, as Fig4.16 shows.When a camera channel alarms, ie. if motion isdetected, the corresponding camera icon will flashyellow to indicate an alarm signal.If you select ‘Auto show’, the alarming camera’simage will pop out automatically as a mini-screenand show the live image so you can view themotion detected, as Fig 4.18 shows.If ‘Auto Show’ is not selected, you can right clickthe camera head to show the live camera image.Further options are available in the Basic Configuration > Alarm menu, in the E-map Tab. Here you canselect if you wish the E-map alarm screen to ‘Auto-hide’ after the live image pops up on screen and theholding time the E-map stays on screen when an alarm is triggered.23 XUSB4DVR User GuideFig 4.18 Auto show on AlarmPlease Note:• E-map only supports three tier levels• When loading a customised map, the image will be enlarged or shortened proportionally to fit the standard sizeof the E-map frame (833x678 pixels)• If ‘Auto Close’ is set, the pop up screen which opens on an Alarm triggering will close automatically after the‘Holding Time’ is over and there is no other activity. ‘Auto Close’ is invalid when the E-map is opened manually.• The default map in the E-map is a demonstration map, and you can use your own map by saving it as a JPEG orBMP file.