Xerox 100 User Manual

Also see for Nuvera 100: System guide Getting started Install guide Software guide Planning guide

Contents

Xerox 100 User Manual Manual pdf 40 page image

Xerox Nuvera® 100/120/144 EA Digital Production System - Customer Expectations Document- 40 -Multifunction Finisher: Professional and Pro PlusTwo configurations are offered – Professional and Pro Plus (available on the 100 & 120 ppmconfigurations only)Professional FinisherTop Tray / Offset Stacker / Stapler / Booklet Maker / Z-fold / C-fold• Envelopes and Statement size paper (5.5” x 8.5”) will be delivered only to the top tray.• Staple locations for non-standard size papers (e.g., standard sizes are A4, Letter size, etc.) will beslightly asymmetrical. The staple will be located in the position appropriate for the next neareststandard paper size.• Certain stocks (stocks with high clay content and / or composed of other high density materials)may reduce the number of sheets that can be stapled and / or result in miss-staples.• Imposition at the printer requires the optional Imposition feature licenseSub-system Feature CommentsTop Tray 250 sheet capacity (20 lb. bond)5.5” x 8.0” to 12.8” x 18.5”Main Stacker 2000 sheet capacity5.83” x 8.0” to 12.8” x 18.5”• Output is normally delivered 1-n, face downto the main tray; jobs can be programmedfor face up delivery if desired but staplingposition & orientation will not be optimal• The system will cycle down when thestacker is full; overflow will not go to the toptray• Sizes can be mixed in the stacker, howevermixed size stacks should be closelymonitored to ensure stack stability• The maximum stack size capability isdegraded for thin stapled sets.Stapler • Staples up to 100 sheets 20 lb. bond of papersized 8.5” x 14” or less with 100 sheet staplecartridge loaded. With 11” x 17” / A3 20 lb.Bond paper, up to 50 sheets can be stapled.• Staples up to 50 sheets 20 lb. bond paper sized11” x 17” / A3 or less with 50 sheet staplecartridge loaded• One or Two Staples• The number of sheets that can be stapledwill decrease in relationship to the weight ofthe paper.• Does not staple tabs or transparencies• The staple placement on the page is shownon the controllerBooklet maker • C – fold1 sheet Letter and A4 sizes• Z – fold1 sheet Letter and A4 sizes• Bi – fold5 sheet capacity (20 lb. stock), Letter (8.5” x11”), A4, Foolscap (8.5” x 13”), Legal (8.5” x14”), Ledger (11” x 17”) and A3 sizes.• Booklets – Dual Staple15 sheet capacity (20 lb. stock), Letter (8.5” x11”), A4, Foolscap (8.5” x 13”), Legal (8.5” x14”), Ledger (11” x 17”) and A3 sizes.• C - fold and Z- fold weight range is 16 to 32lb. (60 to 120 gsm)• Bi-fold & Booklet sheet capability is reducedwith heavier stocks• No face trim• No Engineering folder• No hole punch