Xerox 100 User Manual

Also see for Nuvera 100: System guide Getting started Install guide Software guide Planning guide

Contents

Xerox 100 User Manual Manual pdf 51 page image

Xerox Nuvera® 100/120/144 EA Digital Production System - Customer Expectations Document- 51 -Finishing Transport Module (FTM)The Finishing Transport Module enables inline finishing by providing documenttransport capability and full DFA support to DFA compliant finishing devices.Key Features include:• Dual DFA enabled output heights• Center or Edge registered output delivery• Varying transport speeds to maximize throughput capability• Built-in rotator to maintain productivity when finishing smaller size applications.Please refer to the Finishing Transport Module (FTM) Solutions PlanningGuide for further site planning information, system dependencies, limitations,valid configurations and device specifications.Dimensions Finishing Transport Module (FTM)Width x Depth x Height 35” x 28” x 44.6” (889mm x 711.2mm x 1133mm)Bypass Output Heights 34” (860mm) & 40.3” (1024mm)Weight 389 lbs. (176 kg)Clearance: Operator Minimum 24” in front of moduleClearance: Service Minimum 30” on all sidesFinishing Transport Module (FTM)Electrical &Environmental Minimum MaximumTemperature Range 41° F (5° C) 95° F (35° C)Humidity Range 10% RH 85% RHAltitude - 100 ft (31m) 40,000 ft (123192m)Sound Emission LpA 57 dBsPower 120 VAC ± 10%, 60 Hz, 7.5 A220 VAC ± 10%, 50 Hz, 3.5 AMedia Latitude &Capacity Finishing Transport Module (FTM)Stock Weight Range Uncoated: 40 lb. text to 90 lb. cover (56 to 250 gsm)Coated: dependent on the finishing device attachedTop Tray 7” x 10” to 12.6” x 18.5” (177.8mm x 254mm to 320mm x 470mm)Bypass withRotation 7” x 10” to 12.6” x 14.3” (177.8mm x 254mm to 320mm x 363.2mm)Stock Size RangeBypass withoutRotation 7” x 10” to 12.6” x 18.5” (177.8mm x 254mm to 320mm x 470mm)Top Tray Capacity 250 (20 lb. bond / 75 gsm)