FORMS DESCRIPTION LANGUAGEPAPERIdentifies the paper size for which the form is designed. It is anoptional command that enables you to select a paper size that isdifferent than the sysgen-defined paper size.Syntax PAPER SIZE IS value;Parameter options valueUSLETTER8.5 by 11 inches/216 by 279 mm.A48.27 by 11.69 inches/210 by 297 mm.USLEGAL8.5 by 14 inches/216 by 356 mm.x unit BY y unitSpecifies nonstandard sizes. The x represents the virtualpage width and the y represents the virtual page height.Units are optional and can be expressed in INCH orINCHES, CM or CENTIMETERS, DOTS, or XDOTS. Thedefault is INCHES.The x and y values must be positive numbers and maycontain two decimal places for all units except DOTS.Default If a PAPER command is not present, and a predefined format isnot specified, the sysgen-defined paper size in effect at run timeis used as the paper size value.Example nonstandard sizes PAPER SIZE IS 16.54 INCHES BY 11.69 INCHES;Example standard sizes PAPER SIZE IS USLETTER;Considerations USLETTER and USLEGAL cannot be abbreviated.You can specify paper size in a Job Source Library (JSL). Whenthe JSL specifies PAPERSIZE using the keyword method, forexample, USLETTER, A4, or USLEGAL, the .FSL must also use thesame method. If the JSL specifies PAPERSIZE=8.5 by 14 andyour .FSL specifies PAPER SIZE IS USLEGAL, one of the followingerror messages is displayed:OS6670 Form paper size too small. Form will not be printed.OS6680 Form paper size too large. Form will not be printed.These errors appear only when you print the form. Themessages do not appear when you compile the form withoutprinting it.Reference The PDL PAPERSIZE command is explained in more detail in yourXerox 4050/4090/4450/4650 LPS Print Description Language (PDL)Reference.Due to edgemarking considerations, the form created byspecifying a paper size of USLEGAL is different from onespecifying 8.5 by 14 inches.XEROX 4050/4090/4450/4650 LPS FORMS CREATION GUIDE 2-5