Xerox 4450 Forms Creation Manual

Also see for 4050: Message guide Code List Message guide Quick reference card Quick reference card

Xerox 4450 Forms Creation Manual Manual pdf 40 page image

FORMS DESCRIPTION LANGUAGELOGOKeyword LOGOEAGLEThe name of the logo, a one- to six-character alphanumericlabel, is given to the logo when it is digitized by the XeroxFont Center or Rank Xerox.AT 10,12The keyword AT and the coordinates (y,x) indicating wherethe logo is to be placed.Considerations Be sure that font memory capacity is not exceeded. Logos largerthan two square inches may be used if they are the result ofusing smaller components of the logo to gain the desired effect.Sample .FSL The LOGO command is typically inserted near the end of the.FSL, as illustrated in figure 2-5.Figure 2-5. Placing a logoHORIZONTAL TEXT USING FONT 2 IN CENTER CENTERBOX 6,1 ’DATE’;COMMENT *** PLACE LOGO ***;LOGO EAGLE AT 1,26;END;GRAPHICYou can use the GRAPHIC command to place your images at anylocation on the page. A form may consist solely of graphics(images). Each graphic to be associated with a form must bespecified in the .FSL file.Syntax GRAPHIC name AT vpos unit hpos unit SCALE IS n/d;Parameter options nameName of a graphic (.IMG) file, found on the system disk.vposSpecifies the vertical position of the top edge of the graphicrelative to the virtual page origin. This parameter is a decimalnumber with up to two decimal places (except for DOTS,which must be an integer). If no unit is specified, grid unitdimensions are used as the default.unitUnit of linear measurement, expressed as inches (IN),centimeters (CM), or DOTS. If units are not specified, gridunit dimensions are used.hposSpecifies the horizontal position of the left edge of thegraphic, relative to the virtual page origin. The format of thespecification is the same as for vpos.2-18 XEROX 4050/4090/4450/4650 LPS FORMS CREATION GUIDE