Xerox 4595 Customer Expectation Document

Also see for 4595: Guide for Operators Introducing Quick reference guide Getting started User guide

Space requirementsOptional Finisher/Folder and HCFThe following illustration shows the space requirements and service space envelope with theoptional Finisher/Folder and HCF installed. For other configurations, consult the ModuleDimensions chart.The illustration below shows the space requirements and service space envelope for the printersystem with the Finisher/Folder and HCF installed. If there is no HCF attached, then the Multi-Sheet Inserter, in the closed position (3.3 in/83 mm), needs to be figured in.The optional FreeFlow DocuSP Print Server Stand is not shown.NOTE 1: The dimensions shown are absolute minimums.NOTE 2: There should be a 78 in. (1981 mm) minimum height clearance in service envelope.NOTE 3: Location of left rear corner of main processor should be marked with tape for deliverypersonnel.NOTE 4: If there is no HCF attached, then the Multi-Sheet Inserter, in the closed position (3.3”/83mm), must be calculated in the space requirements.Optional Finisher/Folder, FFPS, and HCFThe following illustration shows the space requirements and service space envelope with theoptional Finisher/Folder, optional FreeFlow Print Server, and optional HCF installed. For otherconfigurations, consult the Module Dimensions chart.NOTE 1: The dimensions shown are absolute minimums.NOTE 2: 78" (1981 mm) minimum height clearance in service envelope.NOTE 3: Location of left rear corner of main processor should be marked with tape for deliverypersonnel. (See diagram above)NOTE 4: If there is no HCF or OHCF attached, then the Multi-Sheet Inserter, in the closedposition (3.3”/83 mm), must be calculated in the space requirements.19