System HighlightsMain Copier/Printer components• 4595 Print Engine (includes Duplexing Automatic Document Feeder (DADF), Scanner, UserInterface, Bypass Tray, and Nationalization Kit)• Embedded Print Server with print drivers• Finisher (Either a 2/3 Hole Punch with Post-Process Inserter OR a 2/3 Hole Punch with Post-Process Inserter and Booklet Maker)Both Finishers are equipped with a Stapler.1Options for the Main System• Bypass Tray Chute1• High Capacity Feeder (2 drawer) (HCF)• Folder Module (C/Z fold & Engineering Z fold)• Foreign Interface Device (FID)• Mobility Plate Kit2• Data Security• Removable Hard Disk Drive (RHD)• Oversized High Capacity Feeder (1 drawer) (OHCF)• FreeFlow ® Print Server (FFPS)The Xerox 4595 is also available in copier-only configurations.FreeFlow DocuSP Print Server (Option)• Support for printing on Pre-cut Tabs• IPDS and LCDS native transaction data streams (optional)• PDF, PS Level 3, PCL 5e, PCL 6, TIFF, VIPP, ASCII, and PPML publishing data streams• Data security and administration• Multiple print queues, up to 255• FreeFlow Print Manager allows job submission, job management and enables RemoteWorkflow• Simultaneous receipt and process of transaction and publishing data streams1 If the optional HCF or OHCF is not present, then the Bypass Tray Chute is used.2 The Mobility Plate is used when the system is installed:• On an uneven floor• On a rug, or• In a constricted/tight location that does not fit within the appropriate installation space envelope• For systems that have an optional OHCF and also use a mobility plate kit, a second mobilityplate kit must be ordered and used with the optional OHCF5