793.6 System Parameter Setup (Printer Control Panel, 6030/6050)3.6 System Parameter Setup (PrinterControl Panel, 6030/6050)The following system parameters can be set up from the printer control panel.These parameters can be set up on the copier control panel on the Xerox6030/6050 Copier/Printers. If the parameters are set up on both the printercontrol panel and the copier control panel, the most recent settings will takeprecedence.• Refer to "2.2 Printer Control Panel Usage" for detailed instructions on printercontrol panel operations.Menu Item DescriptionSet Date Sets up the internal clock. The parameters are set inthe order year, month, day, hour, and minutes.AUTO ROLL Determines whether the automatic paper switchingfunction from the roll to the tray and tray to the roll is[ON] or [OFF].The default setting is [OFF].SPA PAPER WIDTH Sets the paper width for SP. JIS/ISO A paper. Thedefault value is [SP A1].[SP. A1] 620 or 625mm[SP. A2] 435 or 440mmSmoothing Determines whether 1200 dpi smoothing will be [ON] or[OFF]. The default setting is [OFF].Low power mode1 Sets the time (1 to 120 minutes) that must elapsefollowing a copy or print job before the machine entersthe Low power mode 1. Low power mode 1 reducesthe temperature of the fuser, decreasing powerconsumption.The default setting is [5] minutes.Low power mode2 Sets the time (5 to 120 minutes) that must elapsefollowing a copy or print job before the machine enterslow power mode 2. Low power mode 2 reduces thefuser temperature more than low power mode 1.The default setting is [15] minutes.Downloaded From ManualsPrinter.com Manuals
