1394.3 Logical Printer Print SettingsOutput OptionSets up the output size. The following two judgment methods are available foroutput image size.• Automatic (AUTO, OTHER, MIX, MIX2)Determines the most suitable output size based on the input size and the sizemapping table. It also determines the roll media size to use based on the outputsize and the media mapping table (or automatically.)• Specify SizeEnables the media size of the input image to be entered directly. The media sizecan be selected from standard sizes and user-defined sizes.This is usually set to [AUTO]. However, it is possible to specify the media size ifthe same size will be used for all jobs.The image will be enlarged or reduced if the input size and output media size aredifferent.The image will not be enlarged or reduced if the [Auto Scale] selection hasbeen set to [NO] for the [Transform] function.Refer to "Size/Media Mapping" for more information about size and mediamapping.Downloaded From ManualsPrinter.com Manuals
