OSS (OPERATING SYSTEM SOFTWARE) MESSAGESOS Level 2: Routine MaintenanceStates a condition and explains what action(s) to take.OS2000 Enter ‘CONTINUE O’ to resume printingorSelect ‘CONTINUE O’ to resume printingPrinting was interrupted by the entered command or a systemrollover. The system is now ready to continue printing.The printer control console displays:PRESS ‘CONTINUE’ TO RESUME PRINTINGAction Enter the CONTINUE O command or press the key tocontinue printing the interrupted job.OS2002 Check paper supply in Tray 1Fewer than 25 sheets remain in (feeder) tray 1.The printer control console displays one of the following:CHECK PAPER SUPPLY IN TRAY 1JOB IS PRINTING--CHECK PAPER SUPPLY IN TRAY 1PRINTER IS WARMING UP--CHECK PAPER SUPPLY IN TRAY 1READY TO PRINT--CHECK PAPER SUPPLY IN TRAY 1Action 1. Add paper to (feeder) tray 1. (Refer to the chapter on feedertrays in your 4635 LPS Operator Guide.)2. Press the key to resume printing.OS2003 Check paper supply in Tray 2Fewer than 25 sheets remain in (feeder) tray 2.The printer control console displays one of the following:CHECK PAPER SUPPLY IN TRAY 2JOB IS PRINTING--CHECK PAPER SUPPLY IN TRAY 2PRINTER IS WARMING UP--CHECK PAPER SUPPLY IN TRAY 2READY TO PRINT--CHECK PAPER SUPPLY IN TRAY 2Action Add paper to feeder tray 2. has. (Refer to the chapter on feedertrays in your 4635 LPS Operator Guide.)XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 6-41
