4 Fax60Xerox CopyCentre/WorkCentre 118 Quick Reference Guide4. Start the Fax Job1.Press the button on the controlpanel to scan and send the documents.NOTE:If a problem, such as a document jam or memory full error, occurs whilescanning multiple documents, the job is canceled and the scanned data deleted. Toresume the same operation, load all the documents again and press the button.NOTE:If the memory full error occurs, delete unnecessary files.NOTE:If the machine is restarted during a fax transmission due to a loss of power ormachine malfunction, the machine will start sending the document all over again whenthe machine is switched on. All pages of the document will be transmitted regardlessof how many pages have already been sent to the destination before the power loss.For example, if the transmission of a 7-page document is interrupted when the sixthpage of the document is being sent, the machine sends all seven pages when thepower is restored, including the first five pages that had already been sent before theinterruption.5. Confirm the Fax Job in the Job StatusFollow the steps below to confirm the fax job you started.1.Press the button on thecontrol panel to display the Job Statusscreen.The job being processed will be displayed onthe Current screen.2.If required, press the <I> or <J> button to display the All Jobs screen.3.Select [Fax/E-mail] using the 4.Select [Send] using the For more information, refer toJob Status in the Product Overview chapter on page 36.Stop the Fax JobFollow step 1 to manually cancel a fax job during document scanning. After scanningthe document, follow steps 2 through 3. button
