Xerox CopyCentre C123 Quick Reference Manual

Also see for C123 Copycentre: Manual Installation guide Evaluator guide Brochure & specs Install guide

Contents

Xerox CopyCentre C123 Quick Reference Manual Manual pdf 16 page image

1 Before Using the Machine14 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 Quick Reference GuideX Do not obstruct the ventilation openings.X Never push objects of any kind into slots or openings on the equipment.Z If any of the following conditions occur, switch off the power to the machineimmediately and disconnect the power cord from the electrical outlet. Call anauthorized local service representative to correct the problem.– The equipment emits unusual noises or odors.– The power cord is damaged or frayed.– A wall panel circuit breaker, fuse, or other safety device has been tripped.– Liquid has spilled into the equipment.– The equipment is exposed to water.– Any part of the equipment is damaged.Disconnect DeviceThe power cable is the disconnect device for this equipment. It is attached to the backof the machine as a plug-in device. To remove all electrical power from the equipment,disconnect the power cable from the electrical outlet.Laser Safety InformationCAUTION: Use of controls, adjustments or performance of procedures otherthan those specified herein may result in hazardous light exposure.With specific regard to laser safety, the equipment complies with performancestandards for laser products set by government, national and international agencies asa Class 1 laser product. It does not emit hazardous light, as the beam is totally enclosedduring all phases of customer operation and maintenance.Operational Safety InformationTo ensure the continued safe operation of your Xerox/Fuji Xerox equipment, followthese safety guidelines at all times.Do These:• Always connect equipment to a correctly grounded power outlet. If in doubt, havethe outlet checked by a qualified electrician.Z This equipment must be connected to a protective earth circuit.This equipment is supplied with a plug that has a protective earth pin. This plug willfit only into an earthed electrical outlet. This is a safety feature. To avoid risk ofelectric shock, contact your electrician to replace the electrical outlet if you areunable to insert the plug into it. Never use a plug that lacks an earth connectionterminal to connect the product to an electrical outlet.• Always follow all warnings and instructions that are marked on or supplied with theequipment.