3 Copy48 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 Quick Reference Guide[2 Sided] ScreenAllows you to select the previous option and whether to rotate side 2 pages head to toeon the printouts.1. Select [More] for [2 Sided]feature on the [Basic Copying]screen.2. Select the required option.3. Select [Save].Rotate Side 2Select this check box to rotate side 2 of the printouts head to toe.NOTE: This option is available only for [1 J 2 (H to H)] and [2 J 2 (H to H)].Copy OutputThis feature allows you to sort copy outputs. If the optional finisher has been installed,the stapling feature is also available. You can select the staple position on the copyoutput.NOTE: The features displayed on the screen vary if the finisher is not installed.NOTE: If the correct size paper is not loaded in the machine when the stapling featureis applied to a copy or print job, a paper size error may occur while processing the job.When this happens, the finisher contains the wrong size paper already processed upto this point. If the machine displays “The paper size/orientation currently loaded inTray 5 (Bypass) is different from the setting:” or “The paper size/orientation in Tray X isdifferent from the selected size. Load xxx” on the touch screen, open the Finisher TopCover and remove the wrong size paper, load the correct size paper in a tray, andrestart the job. If you simply replace the paper in a tray and resume the job withoutremoving the processed paper in the finisher, the machine will staple the wrong sizepaper still in the finisher and the correct size paper from the tray together.AutoAutomatically applies either [Collated] or [Uncollated] for sorting copy output. The[Collated] option is applied when you use the document feeder or you have enabled[Bound Originals], [Covers], [Blank Separators + N Sets], [Stapling], [Build Job],[Sample Set], or [Booklet Creation]. For all other options, [Uncollated] is applied.Top LeftStaples the top left corner of the output.
