Xerox CopyCentre C32 Quick Reference Manual

Also see for CopyCentre C32 Color: User manual Brochure Supplementary guide

Contents

Xerox CopyCentre C32 Quick Reference Manual Manual pdf 154 page image

PAGE 10-6 XEROX C OPY C ENTRE/W ORKC ENTRE PRO 32/40 C OLOUR Q UICK R EFERENCE G UIDETROUBLESHOOTING Paper Jams inside the machine¾ Check the Paper Path for obstructions.¾ Flip the paper over in the paper tray.¾ Check the paper tray Edge Guides to see if they are against the edges of thepaper.¾ Check that the Touch Screen is displaying the correct size for the paper in use.¾ Load fresh paper.Repeated Check Tray Messages on the User Interface and thepaper is loaded in the tray¾ Adjust the edge guides against the stack of paper in the tray.¾ If the edge guides were not set against the paper stock in the tray when Startwas selected, delete the job in the job queue and begin again.Paper Curls¾ Load the paper in the paper trays seam side of the paper up. Load the paper inthe Bypass Tray with the seam side down.¾ Load non-standard media in the Bypass Tray.¾ If the paper curls excessively, flip the paper over in the applicable paper tray.FinisherThe Finisher does not stack the output correctly¾ Unload the finisher tray frequently.¾ Do not remove stapled sets while the finisher is compiling.The Finisher does not staple or staple well¾ Use less than 50 sheets of paper if they are heavier than 20 lb., 80 gsm. The maximum number of sheets is 20 when stapling heavyweight paper.¾ Check the User Interface for a message indicating a need for staples. Replacethe staple cartridge.The seam refers to the side of a ream ofpaper with a split in the wrapping. It mayalso be referred to as arrow side first.Spode QRG.book Page 6 Tuesday, May 13, 2003 10:51 AM