Xerox CopyCentre C32 Quick Reference Manual

Also see for CopyCentre C32 Color: User manual Brochure Supplementary guide

Contents

Xerox CopyCentre C32 Quick Reference Manual Manual pdf 155 page image

XEROX C OPY C ENTRE/W ORKC ENTRE P RO 32/40 C OLOUR Q UICK R EFERENCE G UIDE P AGE 10-7TROUBLESHOOTINGOutput QualityStray marks or black marks from hole punched originals are notremoved¾ Use the Edge Erase to erase the edge with the drilled holes.¾ Copy from the document glass with the Document Cover down.Images are out of sequence or upside down when the BookletCreation Feature is used¾ Ensure that the originals are in the correct sequence.¾ Feed LEF originals to SEF orientated paper stock.¾ Enable the display options for Booklet Creation and ensure that the correctsequence is selected (i.e.Left to Right or Right to Left).The output is blank¾ Ensure the originals are loaded either face up in the Document Handler or facedown on the Document Glass.Streaks, lines, spots, or black, solid, or dotted lines on the prints¾ Run the job from the Document Glass.¾ Check the quality of the original. Use Border Erase or Edge Erase to removelines from the edges of the document.¾ Turn on Background Suppression.¾ Load fresh paper.Image Loss¾ When copying a document from a larger paper size to a smaller size, use Auto%to reduce the image onto the smaller size.¾ Use reduction i.e., copy at 90% instead of 100%.¾ Select [Auto Center] and run the job again.¾ If scanning from the Document Glass, select [Manual Platen Input] and definethe document size. Register the document in the right rear corner and copy withthe cover down.Blurred images on output¾ Load fresh paper.Spode QRG.book Page 7 Tuesday, May 13, 2003 10:51 AM