Page 4-24 Quick Reference GuideInserts Use this feature to add up to two additional stock types to your job. For example,you can separate sections using blank sheets or tab stock, or print the first page ofeach section on different colored stock to separate chapters.A combination of standard size media, tab stock, card or colored paper can be usedfor the inserts. Load your insert stock into one of the paper trays. If two differentinsert stocks are required, load them in different paper trays. The recommendationis to use trays 1 and 2 for your insert stocks.To prepare your document for programming the inserts, identify the page numberwhere the insert is required by counting through the pages. If you require blankinserts, add blank sheets to your document where the inserts are to be placed. Amaximum of 40 insert sheets can be added to a document.HINT: Inserts and Covers can be selected in the same job.NOTE: This feature is not available with the Auto Paper option, a paper tray mustbe selected. This feature is also not available with 1-2 or 2-1 copying.Options:Off The feature is switched off.First Insert Tray Use this option to program all the inserts which require the first stock you haveloaded.Select the First Insert Tray option. Using the up/down arrow keys, enter the pagenumber of the first insert and select Add Insert. The page number displays in theInsert Page as Side window. If a page number is entered incorrectly, use the DeleteLast Insert option to remove it from the window. Continue entering page numbersuntil all the inserts requiring the first stock have been programmed.Select the paper tray containing the first stock using the Insert Tray option on theright of the screen.
