5. If necessary, set the IP Address.6. Select Close until you see the Tools tab.7. Reboot the machine, if prompted.8. After the machine is restarted, print out a configuration report to confirm that theSMB or FTP client is enabled and that TCP/IP is set up correctly.Configuration on the ComputerCreate a destination folder on your computer.Using FTP:Create a destination folder on the server where you login and set write rights on thefolder.Using SMB:Create a shared folder on your computer and set the write rights on the shared folder.NoteTo use SMB on Mac OS X, set Windows Sharing to On in the Service tab of Sharing underSystem Preferences.Configuration of Store to USBThis section describes how to configure the machine to use the Store to USB feature.To use this feature, the optional USB Enablement Kit must be installed on the machine.USB Memory DevicesThe Store to USB feature allows you to directly save the scanned data to a USB 2.0memory device that is inserted into the USB memory slot on the machine. The followingmemory devices can be used:• USB 2.0 memory devices• USB memory devices with capacities of up to 128 GB• USB memory devices that support FAT12, FAT16, FAT32, or VFATNoteUSB memory devices that are encrypted with software cannot be used with themachine.Enabling Store to USB1. Log in as an administrator.Xerox® D95/D110/D125/D136 Copier/Printer5-12System Administration GuideUsing the Scan Service
