Xerox DocuColor 5750 Administrator's Manual

Also see for DocuColor 5750: Getting started User guide Reference guide Reference guide Reference guide

Contents

Xerox DocuColor 5750 Administrator's Manual Manual pdf 70 page image

22-42 Setting up the DocuColorThis affects all users. Continue?Yes/No [Yes]This option is a reminder that calibration is a global setting; if you remove calibration,every print job is affected by your action.If you choose Yes, the current calibration is removed and you return to the main Cali-bration screen. If you are finished, choose Exit Calibration. The DocuColor reboots.If you choose No, the calibration is not removed, but you still return to the main Cali-bration screen.Exit CalibrationWhen you choose Exit Calibration, the DocuColor reboots.Change PasswordChange Password enables you to set or change the administrator password for theDocuColor. The password determines whether a user can modify the Setup options,and whether a user has system administrator control over jobs in the Spooler andWebSpooler queues.Using the Spooler or WebSpooler, users can move, delete, and configure their ownprint jobs; the DocuColor system administrator (or anyone with administrator pass-word access) can move, delete, and configure jobs for all users, and can re-order jobswithin a queue.When the DocuColor is installed, there is no password. If you do not create a pass-word, users are not required to enter a password to modify the Setup or use the admin-istrator functions in the Spooler or WebSpooler.If a password has been set previously, you are required to enter it right after Start Up,when you choose Run Setup. Use the up and down arrow keys to select the charactersand the left and right arrows to move between them (see page 2-6).Scroll to the third screen of the main Setup menu to choose Change Password.Enter and confirm the password as described below.Change PasswordClear ServerSetup