DocuMate 262 Scanner User’s Guide 55ScanningThe Device Settings TabA Device Settings tab appears on the Scan Configurations dialogbox when your selected Destination Application sends the scannedimage to a printer, fax application, or other device. You use theoptions on the Device Settings tab to select settings for the device.1. Click on the Device Settings tab.Fit to page, reduce image if necessary—If the scannedimage is too big to be printed or faxed on a single page, theimage will automatically be reduced to fit the page.Actual size, crop image if necessary—If the scanned imageis too big to be printed or faxed on a single page, the image willautomatically be cropped around its edges to fit on the page.Center image on page—The image will be printed in thecenter of the page instead of at the top right corner.Maintain aspect ratio—The aspect ratio is the length-to-widthrelationship of the image’s dimensions. Select this option sothe image’s relative proportions remain constant.AutoRotate image for best fit—If the image is a Landscapeformat and the device is printing in the Portrait mode, or viceversa, rotate the image to fit on the page.Collate copies—If you are printing more than one page,collate the copies. Enter the number of copies in the Copiesbox.Advanced—Click to see additional settings for the device. Thedialog that opens is specific to the device. For example, if thedevice is your printer, the dialog box is your printer’s setupsettings.2. Click OK or Apply.
