Installation and setupIPS Gateway User’s Guide (5/2002) 2-2RequirementsThis section describes IPS Gateway installation and software licensingrequirements.Installation requirementsThe following hardware and software is required to install IPS Gateway:• 650 MHz Sun Blade™ workstation with 512MB of memory• One of these Xerox printers:— DocuPrint 2000 Series 75 EPS— DocuPrint 2000 Series 90 EPS• DocuSP, version 3.5 or higherIPS Gateway does not require any printer memory in addition to thatalready installed on your DocuPrint printer.If your IPDS configuration requires a channel connection, you will needan online channel board. Contact your local Xerox representative for moreinformation.Licensing requirementsThis feature must be licensed in IPS Gateway for IPS Gateway to function:• IPS/NPSThese features must be activated and enabled in DocuSP for IPSGateway to function:• IPS Gateway• PostScript Decomposer• SNMP Gateway• TCP/IP Socket GatewayLicenses are provided by your local Xerox representative prior toinstallation. The license string and expiration date for each are enteredimmediately following the software installation.