Xerox DocuPrint 100MX User Manual

Also see for DocuPrint 100MX: Install guide Security guide User guide Specifications Brochure

Contents

Xerox DocuPrint 100MX User Manual Manual pdf 54 page image

IPS Gateway operationIPS Gateway User’s Guide (5/2002) 3-18Setting up media in DocuSPIn DocuSP, define and load the media required to run your job(s). Referto the DocuSP System Guide for instructions on defining media. All mediadefined in DocuSP, including custom sizes, are supported by IPSGateway.Mapping IPDS trays to media definitionsThe Media Setup tab allows you to map a specific medium to eachpossible IPDS Tray Selection Value in the IPDS data stream. Eachspecified IPS Gateway medium must already be defined correctly in theDocuSP Printer Manager and loaded in that tray. For IPS Gateway, thereare eight possible IPDS Tray Selection Values (1 through 8).When IPS Gateway receives the IPDS Tray Selection Value for the IPDSpage it is composing, it sends the medium specification currently definedfor that IPDS tray to DocuSP, which uses the stock specification todetermine which physical tray to pull from.For an IPS Gateway job, if the requested IPDS tray is mapped to mediumnot assigned to a physical tray in DocuSP:• The job displays as ineligible in DocuSP and does not print• The invalid media definition displays in red on the IPS GatewayMedia Setup tabNOTE: If media is changed in the DocuSP Printer Manager, the IPDSmedia setup in IPS Gateway must be updated to reflect the validmedia definition(s).If you define custom paper sizes in DocuSP, the actual dimension is listedin the Media Definition drop-down in the IPS Gateway Media Setup tab,instead of the Size name. This table provides the dimensions for somecommon paper sizes.Paper size Inches MillimetersUS Letter 8.50 x 11.00 216 x 279US Legal 8.50 x 14.00 216 x 356US Ledger 17.00 x 11.00 432 x 279A3 16.54 x 11.69 420 x 297A4 8.27 x 11.69 210 x 297US Statement 5.50 x 8.50 140 x 216