Xerox DocuPrint 100MX User Manual

Also see for DocuPrint 100MX: Install guide Security guide User guide Specifications Brochure

Contents

Xerox DocuPrint 100MX User Manual Manual pdf 28 page image

Installation and setupIPS Gateway User’s Guide (5/2002) 2-12Setting up mediaIn DocuSP, you must define the media using the Printer Manager, assigneach media definition to a specific physical printer tray, and load themedia in the trays.These media definitions are communicated to IPS Gateway for mappingto IPDS trays through the Media Setup tab. In IPS Gateway you will mapa specific media definition to each IPDS Tray Selection Value expectedfrom the IPDS data stream.Each media definition includes these attributes:• Size• Type• Color• WeightSetting up media in DocuSPIn DocuSP, define and load the following media in order to run theinstallation verification jobs provided with IPS Gateway:• US Letter (any tray)• A4 (any tray)Refer to the DocuSP System Guide for instructions on defining media inDocuSP.Setting stock name preferences in DocuSPThe DocuSP stock name preferences settings must be changed to Allowduplicate names for DocuSP to honor IPS Gateway media definitions.When IPS Gateway submits a job, the job submission uses the paper size,type, weight, and color.If the Allow duplicate names setting is not set, DocuSP forces each stockname to be unique within the Program Manager, causing jobs to goineligible. By allowing duplicate names, DocuSP ignores stock names andselects the media based on the size, type, color, and weight specified.To set the Allow duplicate names setting in DocuSP:Step 1. Select Preferences from the Setup menu.Step 2. Select the Stocks and Trays tab.Step 3. In the Stock Names area, select Allow duplicate names and click OK. Amessage stating DocuSP must be restarted displays.Step 4. Select either Auto Generate Name Extension or Manually GenerateName Extension.Step 5. Click OK and then restart DocuSP.